CONTACR US

AluminaZC-H(βAlumina) Bricks - AZS Bricks Series




    1.Has a high resistance to acids, alkalis and glass liquids

    2.Used for contact with molten glass

    3.Used in the upper structure of glass melting furnaces

Description


AluminaZC-H(βAlumina) Bricks - AZS Bricks Series Introduction

AluminaZC-H(βAlumina) refractory bricks for glass furnace is a white solid formed by pure alumina powder and zircon sand containing zirconia 65% and about 34% silica in the electric furnace and then injected into the mold to be cooled. The AZS bricks structure consists of an eutectoid and a glass phase of corundum and zirconium, AluminaZC-H(βAlumina) fused cast bricks are phased as eutectoids of the corundum phase and the zircon oblique phase, the glass phase is filled between their crystals.

AluminaZC-H(βAlumina) Bricks - AZS Bricks Series Application

AluminaZC-H(βAlumina) bricks is formed by a majority of beta alumina crystals and a sight portion of alpha alumina crystals in compact structure .AluminaZC-H(βAlumina)refractory  brick has very strong resistance to high temperature & alkaline vapor, good thermal shock resistibility. AluminaZC-H(βAlumina) fire bricks for the glass furnace is the optimal material for melter crown, port arch and channel,roof cover of high quality glass furnace.

AluminaZC-H(βAlumina) Bricks - AZS Bricks Series Specification
 
Al203 93%
Na20 6.5%
alpha alimina 1%
beta alumina 99%
True specific Gravity 3.26g/cm3
Cold Crushing Strength 200Mpa
RefractorinessUnder Load of 0.2Mpa 1700℃

AluminaZC-H(βAlumina) Bricks - AZS Bricks Series Using Precautions in Glass Kiln

1.Irregular Changes in Thermal Expansion

The expansion curve of the refractory AluminaZC-H(βAlumina) brick has an anomaly near 1000 °C, the internal ZrO2 crystal undergoes a reversible crystal transformation with a large volume change. Therefore, AZS block product containing ZrO2 should not be used at around 1000 °C, and the temperature of AluminaZC-H(βAlumina) firebrick is often A region that fluctuates sharply. When baking the kiln, the temperature change at 900~1150 °C should not be too large, generally can not exceed 15 °C / h, requiring a steady temperature rise. AZS fused cast bricks parts should be protected from blowing cold air and protected by other bricks to prevent cracking.

2.Shrinkage

When casting, there are often shrinkage holes in the casting mouth, and azs refractory brick body has more pores and poor density. Therefore, when the glass wall of the glass melting part is made, the shrinkage holes are directed toward the direction of the kiln. When AZS refractory brick is eroded to a very thin level, azs brick will cause a leakage of glass liquid. When used in the upper flame space of the kiln, the service life is very long, and there is no problem of running glass. Therefore, the casting port is used outwards to extend the service life.

3.Eutectic

The AZS refractory brick and the clay brick are in contact with the clay brick. The eutectic phenomenon occurs at a high temperature of 1300 °C. Therefore, when the refractory material is selected, the two refractory materials with severe eutectic phenomena should be avoided from contact with the masonry, such as silica brick casting. Below fused cast aluminaZC-H(βAlumina) bricks ,AZS brick is most susceptible to erosion by the fused cast AZS brick.

AluminaZC-H(βAlumina) Bricks - AZS Bricks Series Packing & Delivery

Consider various and complex transportation conditions,all fused cast azs bricks products are packing following the highest standards with foam boards between every two blocks, corners protected with triangular hard card boards by steel bands and wrapping in plastic film on the outside.

For easy location of different refractory materials, AluminaZC-H(βAlumina) refractory brick packing lists are places both inside and outside packages, shipping marks are clearly painted on all cases.

 AluminaZC-H(βAlumina) Bricks Producer

We specialize in the production of refractory bricks for nearly 20 years, which has formed a comprehensive enterprise for the production of refractory materials for the metallurgy, building materials, power, and chemical industries.

we have any Certificate according to client requirement,such as ISO9001 certificate, CE.    
    
If you worry about the our factory ,which is not satisfy with your high requirement and remove you doubts,welcome to visit our factory & company,the technologists & designers waiting for you.

If not sure what refractory material or refractory bricks you need,please tell us your any requests on refractory material performance and specification & working temperature & working environment as well as application ,according to your requirement ,that we can recommend suitable refractory bricks,we can make sure that you can’t disappointed.

If you make sure what firebricks you need ,please provide the drawings you used in the past, we can do better ,satisfy your any technology requests.

We have the professional sales team,if you have any smaller problem ,we can solve them at any time. We treat every client as a friend ,friend is precious.

In your inquiry ,please provide detailed information you known ,thank you.

Related Products

AZS-41 Bricks

more

Fused Corundum Brick

more

High Chrome Bricks

more

Leave A Message

Copyright @ Terrishi Group All rights reserved sitev map /site index